Packaging Information

Profile Series Sizes

Note:

Concrete masonry veneer units with a length greater than 410mm (16.14”) may not be defined as unit masonry by the respective standard. When considering non-standard dimensional units, structural performance of the block unit and of the masonry construction should be reviewed and verified.

 

Concrete masonry veneer units that are 90mm (3.5”) or less in height and produced as a single size will require more frequent control (movement) joint spacing. Refer to the NCMA TEK 10 series on movement control.

 

To ensure proper construction, please refer to your local Building Code(s), Standards and Industry Best Practices.

 

Brampton Brick Limited is not design responsible.

Profile Block Sizes

90 x 390 Block

10cm Ashlar
Depth 90 mm (3 1/2")
Height 90 mm (3 1/2")
Length 390 mm (15 3/8")

Profile Series 90 x 590 Block

10cm 90 x 590
Depth 90 mm (3 1/2")
Height 90 mm (3 1/2")
​​​​​​​Length 590 mm (23 1/4")

Profile Series 190 x 390 Block

10cm Standard
Depth 90 mm (3 1/2")
Height 190 mm (7 1/2")
Length 390 mm (15 3/8")

Profile 190 x 590 Block

10cm 190 x 590
Depth 90 mm (3 1/2")
Height 190 mm (7 1/2")
Length 590 mm (23 1/4")

Corner Stone by Brampton Brick

Corner Stone 90 x 190 x 190(R) x 390(F) mm

Depth 90 mm (3 1/2")
Height 190 mm (7 1/2")
Return Corner Length 190 mm (7 1/2")

Face Length 390mm (15 3/8'')

Other Sizes Available  
Dimensions (D x H x L)
90 mm x 90 mm x 290 mm 
(3 1/2” x 3 1/2”  x 11 3/8”)
140 mm x 90 mm x 390 mm
(5 1/2”  x 3 1/2”  x 15 3/8” )
140 mm x 190 mm x 390 mm
(5 1/2”  x 7 1/2”  x 15 3/8” )
190 mm x 90 mm x 390 mm
(7 1/2” x 3 1/2” x 15 3/8”)
190 mm x 190 mm x 390 mm
(7 1/2” x 7 1/2” x 15 3/8”)
240 mm x 90 mm x 390 mm
(9 1/2” x 3 1/2” x 15 3/8”)
240 mm x 190 mm x 390 mm
(9 1/2” x 7 1/2” x 15 1/2”)
290 mm x 90 mm x 390 mm
(11 3/8” x 3 1/2” x 15 3/8”)
290 mm x 190 mm x 390 mm
(11 3/8” x 7 1/2” x 15 3/8”)